Contact Us
Blog Brochure

anchor bracket

Easifix anchor brackets are located at each end of every horizontal spacer profile (except at the head). The two prongs should be bent to a 90o angle (with pliers) and then inserted into the chambers within the horizontal extrusion. After inserting anchor bracket prongs, apply a dab of Easifix building adhesive. Brackets should be connected to either the timber liner (inserted in Easifix sleeve) or perimeter stud framework 

Anchor brackets provide the glass block panel restraint as it securely fastens the panel to the perimeter opening (similar to a brick tie or Rods & Mortar reinforcement rods).

These are manufactured from polished stainless steel, with four countersunk pre-punched holes for flat insertion of four screws.

easifix spacer

(Screws not included).