|
  The corner post offers
a solution for constructing glass block walls around a 90°
corner. A corner boss section is secured to the floor and
another is secured into the ceiling and then the corner
post is slid into place, until the panel is fully constructed
the post can temporarily be held in place by siliconing
inside the boss section.
Specification
 |
| White & Metallic Corner Posts |
The corner post is 3" square and 2700mm long,
can be cut down on site and is secured in place similarly
to the end post, by two stainless steel boss sections.
The boss sections are available in either
brushed or polished stainless steel.
 |
 |
| Polished Corner Boss |
Satin Corner Boss (Brushed)
|
Note: Corner and End posts are recommended
for internal use only, carry no fire rating, can only be
used in conjunction with 80mm glass blocks and are suitable
for use with either Rods & Mortar or Easifix systems.
Suitable for:
|
The End Post offers a solution when a glass block wall can only
be restrained to one vertical jamb & to the floor / horizontal
base, the end post can be secured floor to ceiling creating a secondary
vertical jamb, meaning that the panel can be secured safely on three
sides. It is compatible with Rods and Mortar, Easifix and Precast
Easifix. 
