Panel Kits

Extensive distribution sales from Glass Block Technology have been analysed and the findings show that about 80 - 85% of glass block projects will be made using 190x190x80 glass blocks within straight panels not exceeding 12 blocks high x 12 blocks wide. On this basis we have designed a new simple way for you to order accessories for any straight panel size from 1x1, a single block to 12 x 12, based upon 190x190x80 glass blocks using Rods and Mortar or Easifix.

Ordering Rods & Mortar Panel Kits
( for Easifix click here)

Note: the prefix denotes the fitting system ie: RM for Rods and Mortar, the first figure denotes the number of blocks wide, the second figure the number of blocks high and the dimensions states the required opening size in mm for example:

Click here to view Rods & Mortar Panel Kits in Adove Acrobat PDF format

Terms
	All kits and opening sizes are calculated using 10mm joints. For alternative spacer peg sizes contact GBT or detail on order.
	If you require Rods & Mortar for fire rating, please consult GBT prior to ordering.
	All kits are based on 190x190x80 blocks for other block sizes contact GBT or use quote pads..
	All kits are based on straight panels, for curved applications contact GBT.
	All kits do not include panel anchors, if required contact GBT.
	Accessory fact sheets referring to fitting instructions are available in the A5 'complete Guide to Glass Blocks' which can be downloaded by clicking here.
KITS INCLUDE
GBT Code	Description
BGBM	10kg Glass Block Mortar
MSSR0.6	0.6m stainless steel reinforcement bar
MSSR1.2	1.2m stainless steel reinforcement bar
ESP80	10mm spacer peg
EXP1	Expansion foam - 2m
EXP2	Bitumen expansion material - 2m
DC794(w)	Dow Corning silicon (white)

To identify the quantity of accessories included with kits refer to the relevant instaquote matrix. These instant calculators list all compnents specific to constructing with Rods & Mortar from one single block to a panel 12 blocks wide by 12 blocks high.

Click here to view Instaquote in Adobe Acrobat PDF format.

Ordering Easifix Panel Kits
(for Rods and Mortar click here)

Note: the prefix denotes the fitting system ie: RM for Rods and Mortar, the first figure denotes the width, the second figure the height and the dimensions stste the required opening size in mm for example:

Now click here to view Rods & Easifix Kits in Adove Acrobat PDF format

Terms
	Easifix kits can only be used in conjunction with 190x190x80 glass blocks
	Easifix is not a fire rated installation system
	Rods & Mortar and Easifix kits and installation systems cannot be integrated
	Grout/Mortar is not supplied with Easifix kits as standard. To use Colmef Vetromix Glass Block mortar as a grout, for panels 1x1 to 6x6 order 1x10kg bag for larger panels up to 12x12, order 2x10kg bags.
	ESL2400 Easifix sleeve and timber is supplied as standard with each kit. If your client does not require this, inform us when ordering.
	Easifix minimum opening sizes shown include ESL2400 Easifix sleeve, used around the perimeter. If sleeve is not required, 17mm each side should be taken off the detailed sizes (34mm).
	Accessory fact sheets referring to fitting instructions are available in the A5 'complete Guide to Glass Blocks' which can be downloaded by clicking here.
KITS INCLUDE
GBT Code	Description
ESP2400	Easifix profile 2.40m
ESP185	Easifix profile 185mm
DC794	Dow Corning Silicon (clear)
MSSAB	Anchor brackets
TIM2400	Timber 2.40m
ESL2400	Easifix Sleeve - 2.40m