HOW TO INSTALL AN END POST NOTE

• End posts are recommended for internal use only
• Carry no fire rating
• Can only be used in conjunction with 80mm glass blocks
• Are suitable for use with either Rods & Mortar or Easifix systems.

The end post is secured in place by two specially fabricated boss sections. The boss section is secured to the floor and another is secured into the ceiling and then the end post is slid into place, until the panel is fully constructed the post can temporarily be held in place by siliconing inside the boss section.

End posts are 2700mm long and can be cut to size on site to suit the floor to ceiling height. The end post is a 3” x 2 “ extruded aluminium box section, powder coated in either gloss white or metallic grey.